Abstract
For production control purposes, the physical parameters such as temperature and pressure were determined in the cavity of a mould by installing sensors. The production process from the incoming material to the cured and finished workpiece was recorded with data loggers. The sensor values determined serve as input parameters for the creation of a simulation model that is intended to represent reality based on the measured data.
Original language | English |
---|---|
Publication status | Published - 30 Oct 2023 |
Event | IEEE Sensors 2023 - Vienna, Austria Duration: 29 Oct 2023 → 1 Nov 2023 https://2023.ieee-sensorsconference.org/ |
Conference
Conference | IEEE Sensors 2023 |
---|---|
Country/Territory | Austria |
City | Vienna |
Period | 29/10/23 → 1/11/23 |
Internet address |