TY - JOUR
T1 - Transient Response of ESD Protection Devices for a High-Speed I/O Interface
AU - Zhou, Jianchi
AU - Xu, Yang
AU - Bub, Sergej
AU - Holland, Steffen
AU - Meiguni, Javad Soleiman
AU - Pommerenke, David
AU - Beetner, Daryl G.
PY - 2022/8/1
Y1 - 2022/8/1
N2 - System-efficient electrostatic discharge (ESD) design (SEED) models of a diode and transient voltage suppressor (TVS) were developed to study their transient response in a high-speed input/output interface. Previously reported SEED models were improved to strengthen their convergence stability and facilitate accurate predictions over a wide range of conditions. These improvements were required to accurately capture the race conditions between the TVS and on-chip diode, where the diode's turn on may prevent turn on of the TVS. Simulations and measurements were performed to demonstrate the impact of the ESD pulse's rise time on race conditions. During a race, results showed the worst-case quasi-static diode current could be twice as high for long rise-time pulses than for short rise-times where the TVS does not turn on, and on-chip diode current may be larger at low test voltages than at high test voltages where the TVS does turn on. Adding a small passive impedance between the external TVS and the on-chip diode helps the TVS turn on and reduce the current through the on-chip diode by more than 50%. Similarly, lengthening the trace between the TVS and diode could reduce on-chip diode current by up to a factor of two.
AB - System-efficient electrostatic discharge (ESD) design (SEED) models of a diode and transient voltage suppressor (TVS) were developed to study their transient response in a high-speed input/output interface. Previously reported SEED models were improved to strengthen their convergence stability and facilitate accurate predictions over a wide range of conditions. These improvements were required to accurately capture the race conditions between the TVS and on-chip diode, where the diode's turn on may prevent turn on of the TVS. Simulations and measurements were performed to demonstrate the impact of the ESD pulse's rise time on race conditions. During a race, results showed the worst-case quasi-static diode current could be twice as high for long rise-time pulses than for short rise-times where the TVS does not turn on, and on-chip diode current may be larger at low test voltages than at high test voltages where the TVS does turn on. Adding a small passive impedance between the external TVS and the on-chip diode helps the TVS turn on and reduce the current through the on-chip diode by more than 50%. Similarly, lengthening the trace between the TVS and diode could reduce on-chip diode current by up to a factor of two.
KW - TV
KW - System-on-chip
KW - Transient analysis
KW - Integrated circuit modeling
KW - Voltage measurement
KW - Probes
KW - Current measurement
UR - https://ieeexplore.ieee.org/document/9789542/
U2 - 10.1109/TEMC.2022.3168855
DO - 10.1109/TEMC.2022.3168855
M3 - Article
SN - 1558-187X
VL - 64
SP - 907
EP - 914
JO - IEEE Transactions on Electromagnetic Compatibility
JF - IEEE Transactions on Electromagnetic Compatibility
IS - 4
M1 - 9789542
ER -