IP2C electromechanical actuators and sensors

Ivan K. Khmelnitskiy, Victor V. Luchinin, Vladimir E. Kalyonov, Anton V. Lagosh, Anton P. Broyko

Publikation: Konferenzband/Beitrag in Buch/BerichtKonferenzartikelBegutachtung

Abstract

Ionic polymer-polymer composites (IP2C) represent a new class of organic electroactive polymers those can be used to create electromechanical transducers (actuators and sensors). In fact, they represent “development” of ionic polymer-metal composites (IPMC) where metal electrodes are replaced by electrodes with organic conductive polymers based on PEDOT:PSS. It is established that IP2C sensors are characterized by a linear response to mechanical excitation in the range of bending deformations of 0.1...1 cm. Under the influence of frequencies of 0.1...20 Hz the amplitude of the output signal is practically unchanged. The sensitivity of IP2C sensors soaked with ethylene glycol was higher than the sensitivity of IPMC sensors. As the actuators studied, IP2C transducers showed a long response time, which involves using ethylene glycol and ionic liquid as solvents.
OriginalspracheEnglisch
Titel2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)
Seiten415-418
Seitenumfang4
DOIs
PublikationsstatusVeröffentlicht - 1 Feb. 2018
Extern publiziertJa
Veranstaltung2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus) - Moscow and St. Petersburg, Russia
Dauer: 29 Jän. 20181 Feb. 2018

Konferenz

Konferenz2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)
Zeitraum29/01/181/02/18

Fingerprint

Untersuchen Sie die Forschungsthemen von „IP2C electromechanical actuators and sensors“. Zusammen bilden sie einen einzigartigen Fingerprint.

Dieses zitieren