TY - JOUR
T1 - A CMUT-based gas density sensor with high sensitivity
AU - Zhao, Libo
AU - Li, Jie
AU - Li, Zhikang
AU - Zhao, Yihe
AU - Luo, Guoxi
AU - Xu, Tingzhong
AU - Guo, Shuaishuai
AU - Liu, Zichen
AU - Wang, Jiuhong
AU - Jiang, Zhuangde
PY - 2019/9/18
Y1 - 2019/9/18
N2 - In this paper, a gas density sensor based on capacitive microfabricated ultrasonic transducers (CMUTs) is developed. The working principle is based on the resonant frequency shift of the membrane by the change of gas density under the fluid-solid interaction. Due to the advantages of high frequency, the frequency shift will be larger, which also results in higher detection measuring sensitivity (DMS). Combined with the fluid added mass model and the electromechanical coupling reduced order model of a CMUT in vacuum, the relationship between gas density and resonant frequency is established. Furthermore, the influences of the structural parameters and the bias voltage on DMS are further analyzed. As a result, a good linearity is shown between gas density and resonant frequency of CMUTs in a certain density range. Simultaneously, the CMUT-based density sensor shows a high measuring sensitivity. After fabricating a sensor with the low-temperature direct wafer-bonding technique and building the gas density detection platform, the resonant frequency and phase-frequency curves of the CMUTs-based density sensor under different bias voltages are achieved by the experimental analysis in the different mixed gas. The results demonstrate the excellent capability of fabricated CMUTs for gas density measurement with a good linear relationship between gas density and resonant frequency and a higher DMS of 9760 Hz • kg-1 • m3, which make it a promising sensor.
AB - In this paper, a gas density sensor based on capacitive microfabricated ultrasonic transducers (CMUTs) is developed. The working principle is based on the resonant frequency shift of the membrane by the change of gas density under the fluid-solid interaction. Due to the advantages of high frequency, the frequency shift will be larger, which also results in higher detection measuring sensitivity (DMS). Combined with the fluid added mass model and the electromechanical coupling reduced order model of a CMUT in vacuum, the relationship between gas density and resonant frequency is established. Furthermore, the influences of the structural parameters and the bias voltage on DMS are further analyzed. As a result, a good linearity is shown between gas density and resonant frequency of CMUTs in a certain density range. Simultaneously, the CMUT-based density sensor shows a high measuring sensitivity. After fabricating a sensor with the low-temperature direct wafer-bonding technique and building the gas density detection platform, the resonant frequency and phase-frequency curves of the CMUTs-based density sensor under different bias voltages are achieved by the experimental analysis in the different mixed gas. The results demonstrate the excellent capability of fabricated CMUTs for gas density measurement with a good linear relationship between gas density and resonant frequency and a higher DMS of 9760 Hz • kg-1 • m3, which make it a promising sensor.
KW - CMUTs
KW - density measuring sensitivity
KW - gas density sensor
KW - resonant frequency
UR - https://www.mendeley.com/catalogue/022b57c9-d2c3-32cd-8750-e8edf369a365/
U2 - 10.1088/1361-6439/ab3bfa
DO - 10.1088/1361-6439/ab3bfa
M3 - Article
SN - 1361-6439
VL - 29
JO - Journal of Micromechanics and Microengineering
JF - Journal of Micromechanics and Microengineering
IS - 11
ER -