Inkjet printing and characterisation of a resistive temperature sensor on paper substrate

Johanna Zikulnig, Christina Hirschl, Lukas Rauter, Matic Krivec, Herfried Lammer, Franz Riemelmoser, Ali Roshanghias

Publikation: Beitrag in FachzeitschriftArtikelBegutachtung

Abstract

Resistive temperature sensors on two different commercially available uncoated paper substrates have been manufactured using inkjet printing of silver nanoparticles. Their dedication is to be integrated in lightweight materials made from natural fibre-reinforced biopolymers for condition monitoring during the manufacturing process and beyond. The printed sensors have nominal resistances of a few hundred Ohms and kOhms, depending on the roughness and porosity of the respective paper substrate. Compared to previous research in this field, the manufactured sensors were fully characterised and extensively tested as part of this work. Furthermore, the influence of the individual paper characteristics on the electrical properties was studied using white-light interferometry and SEM imaging. All sensors show a good linear temperature dependence, minimal hysteresis and low baseline drift in the temperature range of interest (20°C–80°C). In an extended temperature range (−25°C to 150°C) and exposed to humidity (0%rH–80%rH) the accuracy and overall quality of the sensors decrease expectedly, still the temperature sensing principle can be exploited depending on the individual application and precision requirements.
Originalspracheundefiniert/unbekannt
FachzeitschriftFlexible and Printed Electronics
DOIs
PublikationsstatusVeröffentlicht - 28 März 2019

Dieses zitieren